Service Guide

Hardware Installations and Upgrades

Intel® Server Chassis SC5650-DP/WS/BRP/UP Service Guide 35

8. Reinstall the front bezel assembly. For instructions, see “Installing the Front Bezel

Assembly”.

9. Reinstall the left side cover. For instructions, see “Installing the Left Side Cover”.

10. Reconnect all peripheral devices and the AC power cable(s). Power up the server.

Removing a CD-ROM or DVD-ROM Drive

1. Observe the safety and ESD precautions listed in Appendix A, “Safety Information”.

2. Power down the server and unplug all peripheral devices and the AC power cable.

3. Remove the chassis cover. For instructions, see “Removing the Left Side Cover”.

4. Remove the Front Bezel Assembly. For instructions, see “Removing the Front Bezel

Assembly”.

5. Disconnect the power and data cables from the rear of the CD-ROM or DVD-ROM

drive (see letter “F” in the following figure). Move latch to the “unlock” position (see

letter “D”). Slide CD-ROM or DVD-ROM drive out of the Device Drive Bay (see

letter “C”).

Figure 38. Removing CD-ROM or DVD-ROM Drive (DP/WS/BRP configuration shown)

Data

Power

AF003105