Service Guide

Hardware Installations and Upgrades
Intel® Server Chassis SC5650-DP/WS/BRP/UP Service Guide 21
10. If installing a server board, refer to your Intel
®
Server Board User’s Guide and/or
Quick Start User’s Guide for installation instructions. Use the mounting screws,
bumpers and standoffs (if necessary) that came with your chassis to secure the server
board to the chassis. Make sure the server board is properly seated and then tighten
the screws firmly, starting with the screws at the center of the server board.
If removing a server board
, disconnect all cables connected to the server board. For
additional removal instructions, refer to your Intel
®
Server Board User’s Guide and/or
Quick Start User’s Guide.
11. For Intel
®
Server Board SC5500BC Only: Re-install the PCI card guide. Insert tabs
on left side of PCI card guide into slots in chassis (see letter “A” in the following
figure). Swing PCI card guide into chassis until right-side blue tabs snap into place
(see letter “B”).
Figure 18. Re-installing PCI Card Guide into Chassis
TP01735
A
B