Installation Guide

Tools and Supplies Needed
Phillips* (cross head) screwdriver
Anti-static wrist strap (recommended)
2.5” Hard Drive Carrier Installation Instruction
Remove the Hard Drive Bracket
1. Remove the screws from the rail of the hard drive carrier (3 #6-32 screws and 1 M3 screw)
2. Remove the screw from hard drive adaptor plate (1 M3 screw).
Figure 1. Removing Screws from Rail and Adaptor Plate
3. Pay attention to the standoff on left back of the bracket. Push left rail outward and get the hard
drive bracket up away from carrier.
Figure 2. Removing the Bracket from Carrier
2 2.5" Hard Drive Carrier Kit Installation Guide for Intel
®
Server Chassis/System