Service Guide

Server Chassis Features
Intel®
Server
Chassis SC5600 Service Guide 3
Feature Description
•
System Status
• System Identification
• Hard Drive Activity
Power Supply
 (1+1) hot-swap redundant PFC high-efficiency 750-W PMBus-compliant
power supply with integrated cooling fans.
 Second redundant 750-W module included
Fans
 Three fixed, non-redundant system fans:
• One 120-mm front fan
• One 92-mm front fan
• One 120-mm rear fan
 One air duct
Processor Cooling
 Processor Heat Sink is not included
 Active processor heat sink(s) is required when using with compatible Intel
®
server/workstation board.
 Supports up to 95-W processor
USB 2.0
 Two front panel USB ports with Front Control Panel
 Four Back panel USB ports (depending on server/workstation board)
Video
 One rear panel video port
Table 3 summarizes the features of the Intel
®
Server Chassis SC5600LX SKU.
Table 3. Intel
®
Server Chassis SC5600LX Features
Feature Description
Dimensions
 17 inches high (Rack: 16.6 inches)
 8.6 inches wide
 28.4 inches deep (Rack: 27.4 inches)
 36.2 kilograms
Hard Drives
 Supports up to ten drives, depending on peripheral choices
 One fixed drive bay for up to six fixed SAS or SATA drives
 Optional four-drive fixed drive bay
 Optional hot-swap drive bays:
• 6-drive SAS/SATA (AXX6DRV3GR or AXX6DRV3GEXP)
• 4-drive SAS/SATA (AXX4DRV3GR or AXX4DRV3GEXP)
Peripherals
 Three multi-mount 5.25-inch peripheral bays
Control Panel
(dependent on option
selected)
 Front Control Panel
 Intel
®
Local Control Panel (Optional)
LEDs and displays
(dependent on option
selected)
 With Front Control Panel
• NIC1 Activity
• NIC2 Activity
• Power/Sleep
• System Status
• System Identification
• Hard Drive Activity
Power Supply
 (1+1) hot-swap redundant PFC high-efficiency 750-W PMBus-compliant