Service Guide

Hardware Installations and Upgrades
Intel®
Server
Chassis SC5600 Service Guide 45
Figure 50. Preparing Chassis for Addition of PCI add-in board
6. Remove the PCI add-in board from its protective wrapper. Be careful not to touch the components or gold
edge connectors. Place the add-in board on an anti-static surface. Record the type and serial number of
the add-in board in your equipment log. Set the jumpers or switches on the board according to the
manufacturer’s instructions.
7. Hold the PCI add-in board by its top edge or upper corners. Firmly press the add-in board into an
expansion slot on the server board (see letter “A” in the following figure). Close the back panel PCI add-in
card retention device (see letter “B”).