Service Guide

Hardware Installations and Upgrades
Intel®
Server
Chassis SC5600 Service Guide 39
Removing and Installing Hot Swap Drive(s)
Removing Hot Swap Drive(s)
1. Press in on the green latch (see letter “A” in Figure 41) at the end of the drive carrier to disengage it from
the hot swap drive cage. Pull out on the black lever (see letter “B”) to fully open the drive carrier. When the
lever reaches a fully opened position, it will push the drive carrier out from the hot swap drive cage. Slide
the drive carrier out of the drive cage (see letter “C”).
Figure 41. Removing Drive Carrier from Hot Swap Cage
2. Remove the four screws securing the hard drive to the drive carrier. Remove the hard drive from the drive
carrier.
Figure 42. Removing Hard Drive from Drive Carrier