Technical Product Specification

Introduction Intel® Server Chassis SC5600

Revision 1.1

Intel order number E39532-004

fans (4-pin) are mounted in front of the server board and one tachometer output fan (4-pin) is

mounted at the back edge of the chassis. Optional four- and six-drive SATA/SAS hot-swap drive

bay kits provide upgrades to allow support for up to 10 hot-swap SATA/SAS drives. Three 5.25-

inch half-height peripheral bays are available for installations of a floppy drive, CD-ROM drive,

and/or other accessories. Standard chassis configuration is pedestal. A rack mount conversion

kit is available.

1.4 Intel

Server Chassis SC5600LX Summary

The Intel

Server Chassis SC5600LX supports redundant power and includes redundant fan

features. The SC5600LX configuration includes PMBus-compliant 750-W PFC 1+1 hot-swap

redundant power supply with all (two) power modules installed. Four LED hot-swap tachometer

output fans (6-pin) are mounted in front of the server board providing redundant cooling.

Optional four- and six-drive SAS/SATA hot-swap drive bay kits provide upgrades to allow

support for up to ten hot-swap SAS/SATA drives. Three 5.25-inch half-height peripheral bays

are available for the installation of a floppy drive, CD-ROM drive, and/or other accessories. The

standard chassis configuration is pedestal. A rack-mount conversion kit is available.

Figure 2. Intel

Server Chassis SC5600LX Components

1.5 Product Matrix

The following product matrix table lists the supported upgrades and optional accessories for the

Intel

Server Chassis SC5600 series.