Technical Product Specification

Intel® Server Chassis SC5600 Introduction
Revision 1.1
Intel order number E39532-004
3
Intel® Server Chassis
SC5600BASE
Intel® Server Chassis
SC5600BRP
Intel® Server Chassis SC5600LX
Backplane
• 10-pack Branding /
Customization Panels
• Unpainted Rack Top
Cover
Backplane
• 10-pack Branding /
Customization Panels
• Unpainted Rack Top
Cover
1. For the product and order codes of each accessory, see Intel
®
Server Chassis SC5600 Configuration Guide, or
refer to Intel
®
Server Configurator Tool at http://serverconfigurator.intel.com/default.aspx
1.2 Intel
®
Server Chassis SC5600BASE Summary
The Intel
®
Server Chassis SC5600BASE is designed to address the entry-level market. It
includes a fixed single 670-W Power Factor Correction (PFC) non-redundant power supply,
which supports up to six hard drives. Two tachometer output fans (4-pin) are mounted in front of
the server board and one tachometer output fan (4-pin) is mounted at the back edge of the
chassis. Optional four- and six-drive SATA/SAS hot-swap drive bay kits provide upgrades to
allow support for six hot-swap SATA drives. Three 5.25-inch half-height peripheral bays are
available for the installation of a floppy drive, CD-ROM drive, and/or other accessories.
Standard chassis configuration is pedestal. A rack mount conversion kit is available.
Figure 1. Intel
®
Server Chassis SC5600BASE Components
1.3 Intel
®
Server Chassis SC5600BRP Summary
The Intel
®
Server Chassis SC5600BRP supports the redundant power capability of the
SC5600LX configuration and the fixed fan features of the Intel
®
Server Chassis SC5600BASE
configuration. The SC5600BRP configuration includes PMBus-compliant 750-W PFC 1+1 hot-
swap redundant power supply with all (two) power modules installed. Two tachometer output