Service Guide

Hardware Installations and Upgrades
24 Intel®
Server Chassis SC5600 Service Guide
Figure 17. Installing Hot Swap Fan
Removing and Installing a DVD- or CD-ROM Drive
Removing a DVD- or CD-ROM Drive
1. Observe the safety and ESD precautions at the beginning of this book.
2. Power down the server and unplug all peripheral devices and the AC power cable.
3. Remove the chassis cover. For instructions, see “Removing the Chassis Cover.”
4. If it is installed, remove the front bezel. For instructions, see “Removing and Installing the Front Bezel.”
5. Disconnect the power and data cables to the DVD/CD-ROM drive.
6. Remove the DVD/CD-ROM drive/slide assembly from the chassis by pressing in on the slide release
latches (see letter “A” in Figure 18). Remove the slides from the DVD or CD-ROM drive by pulling the
slides away from the drive (see letter “B”). A gentle pull should release the slide from the side dimple on
the drive.