Install Guide

Installation Information

4 Slimline USB Floppy/CD-ROM/DVD-ROM Drive Kit Install Guide

Remove Cage Top from Drive Cage

1. Face the front of the drive cage.

2. Pull out slightly on the rolled lip at the left side of the cage top.

3. Disengage the cage top from the tabs at the left side (see letter “A” in the following

figure).

4. Lift the left side of the cage top.

5. Disengage the cage top from the tabs on the right side of the drive cage.

6. Remove the cage top (see letter “B”).

Figure 2. Removing Cage Top from Drive Cage

AF000492