AXXRSBBU3 (NiMH battery pack) Installation Guide

10 Intel
®
RAID Smart Battery Installation Guide
Intel
®
RAID Controller Add-in Cards
Connect the cable to the remote battery connector on the backside of the board as shown below.
Figure 8. Routing the Cable inside the Chassis and Connecting to the Remote Connector on
the Intel
®
RAID Controller Add-in Card
Refer to the Intel
®
RAID Controller Hardware User Guide to locate the 20-pin remote battery
connector on the backside of the board (usually the only connector on the backside).
Finish Up the Hardware
1. Reinstall any components inside of the server chassis that were removed. See your server board
or chassis documentation for instructions.
2. Install the server chassis cover and connect the AC power supply.