Technical Product Specification

Intel® Local Control Panel Menus Intel® Local Control Panel TPS

Revision 1.2

Intel order number C96442-003

Symbol

Description



No LCP support.

Error in reading status.

Sensor is in update mode or will display when system is off.

Unknown status. This is used when sensor has not been either initialized or marked as in update mode.

8.2 Server Configuration

This menu includes options that are used to configure the server or to display server

configuration information. This option has several sub-menus, as described below.

8.2.1 Network

 LAN Channel Select: Select the BMC LAN Channel to be configured. See the platform-

or board-specific Technical Product Specification and the Intel

Management Module

Technical Product Specification for information about which physical onboard NIC port

corresponds to which IPMI LAN channel within the BMC.

 IP Address: Set or view the selected LAN Channel IP address in the BMC. You must

select a LAN channel to be configured before selecting this option.

 Netmask: Set or view the selected LAN Channel Network Mask in the BMC. You must

select a LAN channel to be configured before selecting this option.

 Gateway Address: Set or view the selected LAN Channel Default Gateway Address in

the BMC. You must select a LAN channel to be configured before selecting this option.

 Enable LAN: Selections are DHCP or Manual (if supported).

8.2.2 Server Name

This allows the user to set or view the server name that is stored in the BMC. If there is no

server name, <none> will display

To edit or add the server name to the display:

1. Touch the Enter button in the Server Name screen. The display will show a series of

dots.

2. Touch the Enter button again to highlight the first dot. At the bottom of the LCP, you will

see “00”. Touch the Back button and the first byte increments. The Up and Down

buttons increment the second byte.

3. Once the correct character is found, use the Enter button to set the information and

move to the next character.

4. Repeat steps 2 and 3 until the name is set. Touch the Up button to escape edit mode.

8.2.3 Asset Tag Info

This displays the system FRU asset tag field.