Install Guide

Installation Information

Slimline USB Floppy/CD-ROM/DVD-ROM Drive Kit Install Guide 5

Install Slimline USB Floppy Drive

1. Insert the slimline floppy drive into the bottom tray of the drive cage.

Figure 3. Inserting Slimline Floppy Drive into Drive Cage

2. Line up the screw holes on the left and right sides of the slimline floppy drive with the

corresponding holes in the drive cage (see letter “A” in the following figure). The

front of the slimline floppy drive will extend slightly out from the front of the drive

cage.

3. Use four screws from the bag marked “FDU” to attach the drive to the drive cage (two

screws on each side). Do not completely tighten these screws until the CD-ROM/

DVD-ROM drive is inserted into the drive cage.

Figure 4. Securing Slimline Floppy Drive to Drive Cage

AF000494

AF000487