Technical Product Specification

Hot Swap Hard Disk Drive Bays Intel® Server Chassis SC5400 5U Kit TPS
60 Revision: 1.0
6.1.12.3 SES Cable
 Only used with SAS controllers – white 3-pin connector on HSBP to white 3-pin SES
connector on motherboard
 Connect to white SES connector on motherboard, OR
 Connect to SES connector on add in peripheral card
6.1.13 Board Layouts
The figure below shows the board layout and connector placement of the 6HDD passive
SAS/SATA hot swap backplane.
A: SATA/SAS hot-swap drive connectors
B: SATA/SAS cable connectors
C: IPMB header
D: SGPIO header
E: SES header
F: Power Connectors
Figure 22. Intel® Server Chassis SC5400 6HDD Passive SAS/SATA HSBP Board Layout