Datasheet

Intel® Entry Server Chassis SC5250-E Compatible Intel® Server Boards

Revision 1.02

Intel order number C32881-001

9.2 Intel® Server Board SE7500CW2 Feature Set

The server board SE7500CW2 support the following feature set:

• Dual Intel® Xeon™ processors using the 603-pin INT mPGA package.

• 400 MHz Front Side Bus

• Intel® E7500 server chipset

MCH memory controller

P64H2 64-bit I/O Hub

ICH3-S I/O controller

FWH Firmware Hub

• Support for up to four DDR200 or DDR266 compliant ECC DDR DIMMs providing up to

4GB

of memory support.

• Three separate and independent PCI buses:

Segment A: 32-bit, 33 MHz, 5 V (P32-A) with four embedded devices:

 2D/3D graphics controller: ATI Rage* XL with 8 MB of SDRAM

 Two Intel® 10/100 82550PM Fast Ethernet Controllers

 ATA-100 RAID controller: Promise Technology* PDC20267

 Two PCI slots capable of supporting full length PCI add-in cards

Segment B: PCI-X 64-bit, 66MHz, 3.3 V, (P64-B) with the following configuration:

 Two PCI slots capable of supporting full length PCI add-in cards

Segment C: PCI-X 64-bit, 133 MHz, 3.3 V (P64-C) with the following device:

One PCI slot capable of supporting full length PCI add-in cards

• LPC (Low Pin Count) bus segment with two embedded devices:

Super I/O controller chip providing all PC-compatible I/O (floppy, serial, keyboard,

mouse) as well as integrated hardware monitoring.

Flash ROM device for system BIOS: Intel

8Mbit N82802AC Flash ROM.

• Three external Universal Serial Bus (USB) ports with an additional internal header

providing one optional USB ports for front panel support.

• Two IDE connectors, supporting up to four ATA-100 compatible devices

• Support for up to four system fans and two processor fans.

• SSI-compliant connectors for SSI interface support: front panel and power connectors.