Datasheet

Intel® Entry Server Chassis SC5250-E System Peripheral Bays

Revision 1.02

Intel order number C32881-001

5.8 Hard Drive Activity LED

Each SCSI drive turns on a green LED when it is accessed. The LEDs are 4-terminal dual-color

(yellow and green) physically located on the backplane.

Table 4. Hard Drive Activity LED

Drive HSBP LED Activated LED Designator LED Color

1 1 DS5A1 Green

2 2 DS5B1 Green

3 3 DS5C1 Green

4 4 DS5D1 Green

5 5 DS5E1 Green

5.9 Hard Drive Fault LED

The hot-swap controller (HSC) is responsible for turning the drive fault LEDs on or off according

to the states specified via commands received from SAF-TE and the IMB. The drive fault LEDs

are yellow and indicate failure status for each drive. The LEDs are physically located on the

LVD/SE SCSI backplane.

The LEDs are 4-terminal dual-color (yellow and green) physically located on the backplane.

Table 5. Hard Drive Fault LED

Drive HSBP LED Activated LED Designator LED Color

1 1 DS5A1 Yellow

2 2 DS5B1 Yellow

3 3 DS5C1 Yellow

4 4 DS5D1 Yellow

5 5 DS5E1 Yellow