® Intel Entry Server Chassis SC5250-E Technical Product Specification Intel order number C32881-001 Revision 1.
Revision History Intel® Entry Server Chassis SC5250-E Revision History Date Revision Number Modifications 10/07/02 0.1 Initial review copy 11/25/02 0.4 Initial feedback incorporated 12/10/02 0.5 Engineering and Technical Marketing changes incorporated to document 2/3/02 0.7 Reviewed for grammar, replaced / edited drawings 3/112/03 1.0 Added MTBF information and part numbers. 5/30/03 1.
Intel® Entry Server Chassis SC5250-E Disclaimers Disclaimers Information in this document is provided in connection with Intel® products. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document.
Table of Contents Intel® Entry Server Chassis SC5250-E Table of Contents 2. 3. Chassis.................................................................................................................................. 2 2.1 System Color ................................................................................................................... 2 2.2 Front Bezel Features ....................................................................................................... 2 2.3 Security......
Intel® Entry Server Chassis SC5250-E 6. 5.10.1 SCSI HSBP Board Layout ...................................................................................... 28 5.10.2 SCSI Hot-Swap Backplane Specifications ............................................................. 28 5.10.3 SAF-TE Board Layout ............................................................................................ 29 5.11 SAF-TE Specifications...................................................................................
Table of Contents 9.7 Intel® Entry Server Chassis SC5250-E Intel® Entry Server Board SE7210TP1-E Feature Set .................................................. 48 10. Product Regulatory Compliance....................................................................................... 50 10.1 Product Safety Compliance ........................................................................................ 50 10.2 Product EMC Compliance ...................................................................
Intel® Entry Server Chassis SC5250-E List of Figures List of Figures Figure 1. ATX 2.03 I/O Aperture ................................................................................................... 3 Figure 2. Front Closed View of Server Chassis SC5250-E .......................................................... 4 Figure 3. Rear Closed View of Server Chassis SC5250-E ........................................................... 5 Figure 4. Front Internal View for Server Chassis SC5250-E .................
List of Figures Intel® Entry Server Chassis SC5250-E Figure 30. Hot-swap Drive Bay, Rear Isometric View ................................................................. 34 Figure 31. Drive Carrier with Air Baffle Installed ......................................................................... 35 Figure 32. Intel® Server Chassis SC5200 and SC5250-E SATA Backplane ............................. 36 Figure 33. Front Panel Controls and Indicators .............................................................
Intel® Entry Server Chassis SC5250-E List of Tables List of Tables Table 1. Chassis Dimensions (approximate) ................................................................................ 2 Table 2. System Power Summary................................................................................................. 7 Table 3. SCSI ID Assignments ................................................................................................... 24 Table 4. Hard Drive Activity LED ........................
Intel® Entry Server Chassis SC5250-E 1. Introduction Introduction This specification details the feature set of the Intel® Server Chassis SC5250-E, an entry-level server chassis designed for Intel® server board products. The server chassis SC5250-E is low cost and allows utilization of multiple platforms and configurations. The server chassis SC5250-E (KPTBASE450) is designed to address the value server market.
Chassis 2. Intel® Entry Server Chassis SC5250-E Chassis Table 1. Chassis Dimensions (approximate) Configuration 2.1 Pedestal Height 17.8 inches (452mm) 17.6 inches (447mm) if feet are removed Width 9.256 inches (235mm) Depth 26 inches (66.04mm) Clearance Front 17.83 inches (452mm). 19.1 inches with bezel (485mm) Clearance Rear 5 inches (12.7mm) Clearance Side 3 inches (7.
Intel® Entry Server Chassis SC5250-E Chassis Note: See the technical product specification appropriate to the server board for a description of BIOS and management security features for each specific supported platform. The technical product specifications can be found at http://support.intel.com 2.4 I/O Panel All input/output (I/O) connectors are accessible on the rear of the chassis. The SSI E-bay 3.0 compliant chassis provides an ATX* 2.03-compatible cutout for I/O shield installation.
Chassis 2.5 Intel® Entry Server Chassis SC5250-E Chassis Views A B C D E F TP00053B A. B. C. D. E. F. Front panel controls and indicators (See Section 7.7, Figure 22 for details) Two 5.25-inch removable media drive bays 3.5-inch removable media drive bay Internal hard drive bay cage (behind door) Security lock USB port Figure 2. Front Closed View of Server Chassis SC5250-E Revision 1.
Intel® Entry Server Chassis SC5250-E Chassis A B C D E F G H TP00054B I J A. B. C. D. E. F. G. H. I. J. K. K Alternate Serial B port knockout Alternate ICMB or external SCSI knockout AC input power connector Power supply Fan I/O ports* Expansion slot covers ICMB or external SCSI knockout Serial B port knockout Location to install padlock loop Chassis intrusion switch Figure 3. Rear Closed View of Server Chassis SC5250-E Revision 1.
Chassis Intel® Entry Server Chassis SC5250-E TP00053C Figure 4. Front Internal View for Server Chassis SC5250-E TP00054C Figure 5. Rear Internal View for Server Chassis SC5250-E Revision 1.
Intel® Entry Server Chassis SC5250-E 3. Chassis Power Subsystem Chassis Power Subsystem The Intel® Server Chassis SC5250-E supports a typical PS/2* form factor power supply with a remote enable feature. The remote enable feature permits the system power to be activated from a variety of sources, allowing the implementation of Wake on LAN (WOL) or other remote management features. The 450-Watt entry power supply (EPS) features and entry SSI (Rev. 3.0) compliant server board connectors.
Chassis Power Subsystem 3.1 3.1.1 Intel® Entry Server Chassis SC5250-E 450-Watt EPS 2.0 Power Supply 450-W Power Supply Mechanical Outline The mechanical outline and dimensions for the 450-W supply are an extended PS/2 form factor. The approximate dimensions are 86-mm (3.3 inches) high by 150-mm (5.90 inches) wide by 180-mm 7.09 (inches) deep. Figure 6. 450-W EPS 2.0 Power Supply 3.1.
Intel® Entry Server Chassis SC5250-E 3.1.3 Chassis Power Subsystem AC Power Line The system is specified to operate from 100-127VAC, 200-240VAC, at 50 or 60 Hz. The specified PFC power supplies are auto-ranging. The system is tested to meet these line voltages, and has been tested, but not specified, at ±10% of the voltage ranges, and at ±3 Hz on the line input frequency.
System Cooling Intel® Entry Server Chassis SC5250-E 4. System Cooling 4.1 Fan Configuration The cooling sub-system in the Intel Server Chassis SC5250-E consists of two system fans and one power supply fan. A 92mm x 25mm fan located in the front of the fixed hard drive cage draws fresh air into the chassis from the front and provides cooling for the hard drive bay. A 120mm x 38mm fan provides cooling at the rear of the chassis, exhausting warm air out of the system.
Intel® Entry Server Chassis SC5250-E System Cooling The server chassis SC5250-E cooling subsystem is dependent upon proper airflow. The designated cooling vents on both the front and back of the chassis must be left open and must not be blocked by improperly installed devices. All internal cables must be routed in a manner that does not impede airflow.
System Cooling Intel® Entry Server Chassis SC5250-E Figure 9. Processor Wind Tunnel Illustration with Intel® Xeon™ Processor with 533MHz System Bus Speed 4.4 Intel® APTWKTCOOLKIT for SE7505VB2 Intel® Server Board Configuration The Workstation Cooling Kit was designed to work with the Intel Server Board SE7505VB2 and Intel Server Chassis SC5250-E, to dramatically reduce system level acoustics making it an effective solution when acoustics is a concern.
Intel® Entry Server Chassis SC5250-E System Cooling New BIOS release 1.08 provides new fan control changes to improve acoustics. In addition, Intel offers a new upgrade kit for maximum improvement on workstations environments, with C15472-701 level boards. BIOS releases contain critical errata fixes. Therefore, Intel recommends updating the BIOS on this board to the most current release. BIOS releases available for the server board SE7505VB2 are available at http://support.intel.
System Cooling Intel® Entry Server Chassis SC5250-E E D B C A TP00502 Figure 11. Remove the Retention Mechanism if present on your Intel® Server Board SE7505VB2 . A TP00496 Figure 12. Remove Retention Mechanism when present on your Intel Server Board SE7505VB2 A TP00497 Figure 13. Remove the old (contaminated) thermal grease (letter A in the following figure) from the top of the processor Revision 1.
Intel® Entry Server Chassis SC5250-E 4.6 System Cooling Installing the Intel® APTWKTCOOLKIT for SE7505VB2 Intel® Server Board The Workstation Cooling Kit was designed to work with the Intel Server Board SE7505VB2 and Intel Server Chassis SC5250-E to dramatically reduce system level acoustics making it an effective solution when acoustics is a concern. Intel Part Number: APTWKTCOOLKIT (Intel MM # 858795).
System Cooling Intel® Entry Server Chassis SC5250-E A A TP00499 TP00499 Figure 15. Install CPU Heatsink units (one per processor) Position the metal clips that came with your Intel® Workstation Acoustic Kit as shown in the following figure 16. Make sure that the center tab (letter B in the following figure) engages the slot in the heat sink base (number 1in the figure). Repeat Steps 4-6 for second retention clip. A C B D 1 3 2 4 TP00575 Figure 16.
Intel® Entry Server Chassis SC5250-E 4.7 System Cooling Configuring CPU Duct Fan Assembly the Intel® APTWKTCOOLKIT for SE7505VB2 Intel® Server Board Fold the Air Duct that came with your Intel® Workstation Acoustic Kit as illustrated in figure 17. Make sure that the black marker lines are positioned towards the inside of the Air Duct. Begin with fold #1 and proceed through fold #7. Completed Air Duct should look like left and right views (see #8 and #9 in the following figure).
System Cooling Intel® Entry Server Chassis SC5250-E E C A D B TP00494 Figure 18. Attach CPU Air Duct to Rear system Fan 1. Place Finger Guard (letter C in the figure) against matching holes in Rear System Fan. 2. Place folded Air Duct (letter D in figure) against matching holes in Finger Guard and Rear System Fan. 3. Fasten Rear System Fan, Finger Guard and Air Duct together by inserting a nylon rivet at each of the four mounting holes.
Intel® Entry Server Chassis SC5250-E System Cooling A C B C TP00501 Figure 19. Install Rear system Fan assembly to System Chassis Revision 1.
System Cooling 4.8 Intel® Entry Server Chassis SC5250-E Install the Front Fan Spacers for the Fixed Hard Drive Bay Install the Front Fan Spacers for systems with a standard fixed hard drive bay cage. The following instructions do not apply to systems with a hot-swappable hard drive bay cage. Use four screws to attach the four plastic spacers to the unlabeled side of the Front Fan.
Intel® Entry Server Chassis SC5250-E System Cooling 2. Use four screws to secure the Front Fan to the hard drive bay cage. TP00572 Figure 22. Securing Fan with Front spacers to the Fixed Hard Drive Bay Revision 1.
System Peripheral Bays Intel® Entry Server Chassis SC5250-E 5. System Peripheral Bays 5.1 3.5" Peripheral Drive Bay The Intel® Server Chassis SC5250-E provides for the installation of a 3.5-inch peripheral, such as a floppy drive, below the 5.25-inch peripheral bays. The bezel must be removed prior to floppy drive installation. When a floppy drive is not installed, a snap-in EMI shield must be in place to ensure regulatory compliance. Cosmetic plastic filler is provided to snap into the bezel. The 3.
Intel® Entry Server Chassis SC5250-E 5.2 System Peripheral Bays 5.25” Peripheral Drive Bays The SC5250-E chassis supports two half-height or one full-height 5.25-inch removable media peripheral device, such as a magnetic/optical disk, CD-ROM, or tape drive. These peripherals can be up to 9 inches (228.6mm) deep. As a guideline, the maximum recommended power per device is 18W. Thermal performance of specific devices must be verified to ensure compliance to the manufacturer’s specifications. The 5.
System Peripheral Bays 5.5 Intel® Entry Server Chassis SC5250-E SCSI Interface 1 The SCSI interface on the server chassis SC5250-E LVD/SE SCSI backplane provides the link between the SCSI bus and the microcontroller (containing the intelligence for the server chassis SC5250-E 1 LVD/SE SCSI backplane). This interface allows the microcontroller to respond as a SCSI target to implement the SAF-TE protocol.
Intel® Entry Server Chassis SC5250-E 5.8 System Peripheral Bays Hard Drive Activity LED Each SCSI drive turns on a green LED when it is accessed. The LEDs are 4-terminal dual-color (yellow and green) physically located on the backplane. Table 4. Hard Drive Activity LED 5.
System Peripheral Bays Intel® Entry Server Chassis SC5250-E Figure 24. Hot-swap Drive Bay, Front Isometric View Figure 25. Hot-swap Drive Bay, Rear Isometric View Revision 1.
Intel® Entry Server Chassis SC5250-E System Peripheral Bays Figure 26. Drive Carrier with Air Baffle Installed 5.10 Hot-Swap Drive Bay Electronics The hot-swap SCSI backplane board set supports the following features: • • Hot-swapping of SCSI drives that allows connecting SCSI devices while the system power is on. Enclosure management and monitoring functions conforming to the SCSI-Accessed Fault-Tolerant Enclosures Specification (SAF-TE), Revision 1.00. Revision 1.
System Peripheral Bays 5.10.1 Intel® Entry Server Chassis SC5250-E SCSI HSBP Board Layout The following diagram shows the layout of components and connectors on the hot-swap SCSI backplane printed circuit board set. This solution consists of two separate boards. The first board provides power distribution and SCSI interfacing of the drives. The second board provides the SAF-TE features and drive failure indicators. Figure 27. Server Chassis SC5250-E SCSI Backplane 5.10.
Intel® Entry Server Chassis SC5250-E System Peripheral Bays The server chassis SC5250-E hot-swap SCSI backplane board set is made up of the following functional blocks: • • • • • • • • SCSI Bus with SCA drive connectors, and active LVDS terminators Microcontroller with program flash and RAM SCSI interface that allows the microcontroller to respond as a SCSI target I2C interface to server board SCSI drive power control Fault indicator support (availability dependent on server baseboard management subsyste
System Peripheral Bays Intel® Entry Server Chassis SC5250-E 5.11 SAF-TE Specifications The server chassis SC5250-E hot-swap SCSI backplane board set performs the tasks associated with hot-swappable SCSI drives, enclosure (chassis) monitoring and management, as specified in the SCSI-Accessed Fault-Tolerant Enclosures Specification (SAF-TE), Revision 1.0.
Intel® Entry Server Chassis SC5250-E 6. Functional Specifications Functional Specifications The hot-swap backplane is responsible for the following system functions: • Drive Fault Light Control - SATA Specification, revision 1.0 does not support fault detection. However, when the Intel® RAID Controller SRCS14L (with 2x5 LED cable) is installed, fault detection is supported. Turning off the green LED does this when a fault occurs.
System Peripheral Bays Intel® Entry Server Chassis SC5250-E 7. System Peripheral Bays 7.1 3.5-inch Hot-swap Hard Drive Bays The SATA backplane provides support for SATA devices using Low Voltage Differential Signaling. The backplane has a connector to accommodate a SAF-TE controller on an add-in card. The backplane supports four 1-inch hot-swap SATA drives when mounted in the docking drive carrier.
Intel® Entry Server Chassis SC5250-E 7.4 System Peripheral Bays SATA Drive # Drive 0 Intel® RAID Controller SRCS14L Channel A0 Drive 1 A1 Drive 2 A2 Drive 3 A3 Hard Drive Activity LED When a drive is first plugged in, the green LED turns on and stays on signifying that the drive has been detected. The green LED will then blink if there is activity to the drive and a RAID Controller SRCS14L with 2x5 LED header has been installed.
System Peripheral Bays Intel® Entry Server Chassis SC5250-E Figure 29. Hot-swap Drive Bay, Front Isometric View Figure 30. Hot-swap Drive Bay, Rear Isometric View Revision 1.
Intel® Entry Server Chassis SC5250-E System Peripheral Bays Figure 31. Drive Carrier with Air Baffle Installed 7.6 Hot-Swap Drive Bay Electronics The hot-swap SATA backplane board set supports the following features: • • Hot-swapping of SATA drives, which allows connection of SATA devices while the system is powered on. Management and monitoring functions conforming to the SATA 1.0 Specification 7.6.
System Peripheral Bays Intel® Entry Server Chassis SC5250-E Figure 32. Intel® Server Chassis SC5200 and SC5250-E SATA Backplane Table 9. Connector References Description Drive 0 Connector Reference J2E1 Drive 1 Connector J2D1 Drive 2 Connector J2C1 Drive 3 Connector J2B1 Power Connector 1 J3A1 Power Connector 2 J2A1 Host Side Drive 0 Host Side Drive 1 Host Side Drive 2 Notes J4A2 This connector is shared for both Drive 0 and Drive 1.
Intel® Entry Server Chassis SC5250-E Host Side Drive 3 LED Connector 7.6.2 System Peripheral Bays J4A1 This connector is shared for both Drive 2 and Drive 3. Drive 3 is the one closest to the PCB. J4R1 This connector is only used with the Intel® Raid Controller SRCS14L and is used to drive the activity LED’s.
System Peripheral Bays Intel® Entry Server Chassis SC5250-E A. B. C. D. E. F. G. H. I. Power / Sleep LED Power button NMI button Reset Button Sleep Button LAN # 1 Activity LED LAN # 2 Activity LED Hard Drive Activity LED Status LED Figure 33. Front Panel Controls and Indicators Table 10.
Intel® Entry Server Chassis SC5250-E 8. System Interconnection 8.1 Signal Definitions System Interconnection The pin-out on the connectors referred to in this section are defined in the respective server board Technical Product Specification (TPS). 8.2 Chassis Internal Cables The following cables are provided as part of the chassis kit: 8.2.1 Front Panel cable A 34-conductor ribbon cable with 34-pin IDC* connectors links the front panel and SSI EEB Revision 3.0-compliant server board. 8.2.
System Interconnection 8.4 8.4.1 Intel® Entry Server Chassis SC5250-E Accessory Cables ICMB Interface Card Cable One 5-pin ICMB cable connects the server board to the ICMB interface card mounted on the chassis rear panel or add-in card slot (Included in the ICMB Interface Card Kit AXX2ICMBKIT) 8.4.2 External SCSI Cable One 68-pin SCSI cable connects the server board or add-in SCSI card to the panel that mounts to the back of the chassis (see Figure ). (AXXEXTSCSICBL) 8.
Intel® Entry Server Chassis SC5250-E Compatible Intel® Server Boards Compatible Intel® Server Boards 9. The Intel Server Chassis SC5250-E supports the following Intel® server boards: • Intel® Server Board SE7501BR2 • Intel® Server Board SE7500CW2 • Intel® Server Board SE7501CW2 • Intel® Server Boards SE7505VB2 • Intel® Server Board S845WD1-E • Intel® Server Board S875WP1-E • Intel® Server Board SE7210TP1-E The features of these boards are provided in the sections below.
Compatible Intel® Server Boards • • • • • • • Intel® Entry Server Chassis SC5250-E o Intel® 82550PM 10/100 Fast Ethernet Controller (NIC12) - Segment B: 64-bit, 133 MHz, 3.3 V, full-length PCI (P64-B) supporting the following configuration: o Two slots: 64-bit, 100MHz PCI-X Slots (PCI-X Slot 3 and Slot 4) o Single-channel Adaptec* AIC-7901 wide Ultra-320 SCSI Controller3 o Zero Channel RAID (ZCR) support. Also known as modular M-ROMB (Slot4) - - Segment C: 64-bit, 133 MHz, 3.
Intel® Entry Server Chassis SC5250-E 9.2 Compatible Intel® Server Boards Intel® Server Board SE7500CW2 Feature Set The server board SE7500CW2 support the following feature set: • • • • • • Dual Intel® Xeon™ processors using the 603-pin INT mPGA package. 400 MHz Front Side Bus Intel® E7500 server chipset MCH memory controller P64H2 64-bit I/O Hub ICH3-S I/O controller FWH Firmware Hub Support for up to four DDR200 or DDR266 compliant ECC DDR DIMMs providing up to 4GB1 of memory support.
Compatible Intel® Server Boards 9.3 Intel® Entry Server Chassis SC5250-E Intel® Server Board SE7501CW2 Feature Set The server board SE7501CW2 support the following feature set: • Dual Intel Xeon processors using the 603-pin INT mPGA package and 604-pin FCPGA package.
Intel® Entry Server Chassis SC5250-E 9.4 Compatible Intel® Server Boards Intel® Server Board SE7505VB2 Feature Set Major features of the SE7505VB2 server board include the following: • • • • • • • • • • • • Dual Intel® Xeon™ processor support Embedded VRM Intel® E7505 chipset Support for four DDR266-registered ECC SDRAM DIMMs AGP 8x Pro 50 connector 32-bit, 33-MHz, 5V keyed PCI segment with two expansion connectors and three embedded devices. - One PCI NIC—Intel® 82550PM Fast Ethernet Controller.
Compatible Intel® Server Boards 9.
Intel® Entry Server Chassis SC5250-E 9.6 Compatible Intel® Server Boards Intel® Entry Server Board S875WP1-E Feature Set The server board S875WP1-E server board provides an embedded ATA-100* “Valu-Raid” interface and supports the following feature set: • • • • • • Support for an Intel® Pentium® 4 processor with hyper-threading technology in a µPGA478 socket with 512KB L2 cache.
Compatible Intel® Server Boards • Intel® Entry Server Chassis SC5250-E Hardware Monitor Subsystem: - Voltage sense to detect out of range power supply voltages - Thermal sense to detect out of range thermal values Four fan sense inputs used to monitor fan activity See the Intel® Server Board S875WP1-E TPS on the support.intel.com website for more detail. 9.
Intel® Entry Server Chassis SC5250-E o o o o o o o o o Compatible Intel® Server Boards Two independent PCI buses (one 32-bit, 33 MHz, 5 V; one 64-bit, 66 MHz, 3.
Product Regulatory Compliance Intel® Entry Server Chassis SC5250-E 10. Product Regulatory Compliance The server chassis SC5250-E chassis is designed and tested to meet the standards and regulation listed below when configured with the Intel server boards specified. 10.1 Product Safety Compliance The SC5250-E complies with the following safety requirements: • • • • • UL 1950 – CSA 950 (US/Canada). EN 60 950 (European Unión). IEC 60 950 (International).
Intel® Entry Server Chassis SC5250-E Product Regulatory Compliance 10.3 Product Regulatory Compliance Markings This product is provided with the following Product Certification Markings. • • • • • • • • • UL / cUL Listing Mark. CE Mark. German GS Mark. Russian GOST Mark. FCC, Class A Verification Marking. ICES-003 (Canada EMC Compliance Marking). VCCI, Class A Mark. Australian C-Tick Mark. Taiwan BSMI Certification Number and Class A Warning. 10.4 Electromagnetic Compatibility Notices 10.4.
Product Regulatory Compliance Intel® Entry Server Chassis SC5250-E Any changes or modifications not expressly approved by the grantee of this device could void the user’s authority to operate the equipment. The customer is responsible for ensuring compliance of the modified product. Only peripherals (computer input/output devices, terminals, printers, etc.) that comply with FCC Class B limits may be attached to this computer product.
Intel® Entry Server Chassis SC5250-E 10.4.5 Product Regulatory Compliance Japan EMC Compatibility Electromagnetic Compatibility Notices (International). English translation of the notice above: “This is a Class A product based on the standard of the Voluntary Control Council for Interference (VCCI) from Information Technology Equipment. If this is used near a radio or television receiver in a domestic environment, it may cause radio interference.
Environmental Limits Intel® Entry Server Chassis SC5250-E 11. Environmental Limits 11.1 System Office Environment Table 11. System Office Environment Summary Parameter Operating Temperature Limits +5oC to +35oC with the maximum rate of change not to exceed 10oC per hour.
Intel® Entry Server Chassis SC5250-E Reliability, Serviceability, and Availability 12. Reliability, Serviceability, and Availability 12.1 MTBF Calculated Mean Time Between Failures (MTBF) at maximum configuration has been calculated at 74000 hours for KDK at 35°C. Table 12.
Upgradeability Intel® Entry Server Chassis SC5250-E 13. Upgradeability Listed below are accessory kits available for the server chassis SC5250-E. Illustrations are provided to indicate some of the kit contents. Not all parts for each kit are shown and the actual part may differ in appearance. 13.1 SCSI Hot-swap Drive Bay Upgrade Product Code AXX2HSDRVUG.
Intel® Entry Server Chassis SC5250-E Upgradeability 13.2 External SCSI Adapter Cable Product Code AXXEXTSCSICBL. This 68-pin LVD SCSI cable allows an internal SCSI connection from the motherboard to be routed to the ICMB/SCSI knockout at the rear of the chassis. Figure 35. External SCSI Adapter Cable Detail Revision 1.
Upgradeability Intel® Entry Server Chassis SC5250-E 13.3 SATA Hot-swap Drive Bay Upgrade Product Code ASATAHSDB. The kit includes a SATA hot-swap drive bay with mounting hardware, Four SATA cables, SATA connection ID Label and a User’s Configuration Guide. The figure below demonstrates removing the fan from the standard drive bay and placing it onto the hot-swap drive bay. Figure 36 Replacing System Fan from IDE Drive Carrier to the SATA Drive Carrier Revision 1.
Intel® Entry Server Chassis SC5250-E Appendix A: Chassis Spares and Accessories Appendix A: Chassis Spares and Accessories Upgrade and Accessory Parts Product Code AXX2HSDRVUG MM # 835948 UPC 7 35858 14630 2 Qty. 1 AXXEXTSCSICBL 830656 7 35858 13953 3 1 ASATAHSDB 853276 7 35858 16062 9 1 APTWKTCOOLKI T 858795 7 35858 16597 6 1 1 Description Hot-Swap SCSI Drive Upgrade Kit – Upgrade Base Chassis to five drives External SCSI Cable Accessory. For use with SCSI Knock-out on rear of chassis.
Appendix A: Chassis Spares and Accessories Intel® Entry Server Chassis SC5250-E AXX2HSDRVUG 835948 7 35858 14630 2 1 Hot-swap SCSI Drive Upgrade Kit – Upgrade. Base KDK SKU to five hot-swap SCSI Drives FHD3PS450 844924 7 35858 15351 5 1 Non-Redundant 450W Power Supply for SC5250-E Base Chassis 007358-581 16062 9 1 Spare serial ATA Backplane Board. FSATAHSDBBRD 85327 8 Revision 1.
Intel® Entry Server Chassis SC5250-E Glossary Glossary This appendix contains important terms used in the preceding chapters. For ease of use, numeric entries are listed first (e.g., “82460GX”) with alpha entries following (e.g., “AGP 4x”). Acronyms are then entered in their respective place, with non-acronyms following. Term AC Alternating Current Definition ACPI Advanced Configuration and Power Interface. ATX Advanced technology extended (motherboard type).
Glossary Intel® Entry Server Chassis SC5250-E NMI Nonmaskable Interrupt OEM Original Equipment Manufacturer OS Operating System PCI Peripheral Component Interconnect PFC Power Factor Correction RPM Revolutions Per Minute RPS Redundant Power Supply PWT Processor Wind Tunnel – Active cooling device included with the Intel® Boxed XeonTM Processors SAF-TE SCSI Accessed Fault –Tolerant Enclosure SATA Serial AT-Attachment interface SCA Single connector attachment.
Intel® Entry Server Chassis SC5250-E Reference Documents Reference Documents Refer to the following documents for additional information: • Intel® Server Board SE7505VB2 Technical Product Specification • Intel® Server Board SE7501BR2 Technical Product Specification • Intel® Server Board SE7500CW2 Technical Product Specification • Intel® Server Board SE7501CW2 Technical Product Specification • Intel® Server Board S845WD1-E Technical Product Specification • Intel® Entry Server Board S875WP1-E Tec
