Specification Update

Enterprise Platforms and Services Marketing Monthly Specification Update
16
Status: This issue will not be fixed.
Workaround: None. Users must enter BIOS setup and set/confirm the required boot order
after entering the RAID configuration.”
31. LCP may not able to display correct reading of some negative
temperature values
Problem: LCP may display wrong reading of some negative temperature values
Implication: LCP reading is not consistence with Intel® RMM3 and Intel® management
software.
Status: Intel will fix this issue in a future LCP FW release
Workaround: None.
Tracker: 189969
32. SR2612UR Hard Disk Status LED is illuminated always
Problem: After system boot up, the Disk Status LEDs of all empty slots are illuminated,
same as the slots with drive installed.
Implication: The issue is only applying to SR2612UR system and exist whatever RAID
technology is used. In this case, the user will not be able to identify the empty
disk slots when system is running.
Status: This issue is root caused to current SAS Midplane behavior, and Intel will fix this
issue in a future firmware release of SAS Midplane.
Workaround: None.
33. A "USB to IDE/SATA" device appears in BIOS and OS when a SATA
optical drive is not installed in a SR1625UR, SR2600UR, or SR2625UR
system.
Problem: When there is no Slimline Optical Drive installed in the system, a “USB to
IDE/SATA” device appears in the BIOS boot order as a USB device. This
device also appears in the OS (ex. Windows Device Manager). This device is
used by the system to connect a SATA drive to a USB port on the baseboard.
Implication: This device will show up in the BIOS boot order, but not booted to. It can be
moved to the bottom or the order to prevent the system from attempting to
boot from it. The device is also reported to the OS. It will show up in Windows