Spares, Parts List and Config Guide

ManualsBrandsIntel ManualsOtherIntel Server Board S5520UR

 5 redundant non-hotswap fans

 1 full height full length riser with PCI Express 2.0 x16

slot

 Passive (pass-through, no SAS controller) SATA

Midplane, cabled to SATA ports on motherboard .

SAS drives can be supported by adding discreet SAS

controller.

 Backplane with proprietary cable-less connection to

Midplane, supporting 8 hot-swap SAS/SATA drives.

Discrete SAS controller must be added to system to

support SAS drives.

 Bridge board

 2 processor heatsinks

 1 hot-swap and redundant capable high-efficient 650W

power supply.

 2 chassis front handles in the box (ears)

Key Optional accessories:

To enable redundant power supply feature – order additional

power supply ASR1625PS

To add SW Raid5 support – order AXXRAKSW5 key

To add HW raid functionality: need to install add-in PCI HW

Raid controller, which must be cabled to Passive Midplane

Alternatively, Passive Midplane may be replaced with Active

(FALSASMP2)

To add support for 8 SAS/SATA drives by add-in controller –

order additional 2.5” HDD drive carriers (available in 10 pack

FXX25HDDCAR).

To add Standard Control Panel - order ASR1625FP

*Note: Only one control panel (Mini, Standard, or Local) can be

used in a system at a time

*Note: Standard CP, LCP and two additional drives are

installed in the same bay, and can not be installed at the same

time

For complete list of accessories – please reference section 2

SR1625URRNA

905166

Same as above but with North American power cord

SR1625URSASR

905665

735858213530

Intel Server System SR1625URR active configuration.

Includes:

 Intel Server Board S5520UR with Intel® 5520 C2

stepping chipset.

 Intel Server Chassis SR1625

 Mini control panel

 6 2.5" HDD carriers (and filler in slots 7&8)