Service Guide

Intel
®
Server System SR2612UR Service Guide 61
3. Install power cables, P1, P2, P3 and Front Panel logic cable, into Motherboard as
shown below.
Figure 63. Installing power cables
4. Install fan cables, FAN 1, FAN 2, FAN 3 and FAN 4 into Motherboard as shown
below.
Figure 64. Install the fan cables
5. Install memory.
6. Install the processor(s).
7. Install processor heatsink(s).
8. If necessary, install the Intel
®
RMM3.
9. Install the PCI riser assembly.
10. Install the processor air duct.
11. Install the top cover and tighten the captive screw.
12. Install the power cords.