Service Guide

Intel
®
Server System SR2612UR Service Guide 11
Peripheral Interfaces External connections:
• Four USB 2.0 connectors (back)
• RJ-45 serial Port A connector
• Two RJ-45 10/100/1000 Mb Network connections
• DB-15 video connector (front and back)
• Internal connections:
• One USB 2x5 pin header, which supports two USB 2.0 ports
• One low-profile USB 2x5 pin header to support low-profile USB
solid state drives
• One DH-10 serial Port B header
• Six Serial ATA II connectors
• Two I/O module connectors
• One RMM3 connector to support an optional Intel
®
Remote
Management Module 3
• SATA Software RAID 5 Activation Key connector
• One SSI-EEB-compliant front panel header
• One SSI-EEB-compliant 24-pin main power connector
• One SSI-compliant 8-pin CPU power connectors
• One SSI-compliant power supply SMBus connector
Video On-board Server Engines* LLC Pilot II controller with:
• Integrated 2D Video Controller
• 32 MB DDR2 Memory
LAN Two 10/100/1000 ports provided by Intel® 82575 PHYs
Expansion Capabilities The following riser card options are available:
• Three full-height PCI Express* slots (passive)
• Five full-height PCI Express* slots (active)
Hard Drives
• Intel
®
Server System SR2612UR:
• 12 3.5-inch hot-swap SATA / SAS hard drives
• Two optional 2.5-inch fixed 3Gbps SATA hard drives (inside
chassis).
• Intel
®
Embedded Server RAID Technology II with SW RAID
levels 0/1/10
• Optional support for SW RAID 5 with activation key
Peripherals
• Slimline bay for slimline SATA optical drive (back)
• PCI riser card bracket
Control Panel
• Standard control panel provides:
– LEDs (front and back)
– Power switch (back)
Table 2. Intel
®
Server System SR2612UR Feature Summary
Feature Description