Technical Product Specification

Intel® Server System SR2600UR TPS Peripheral and Hard Drive Subsystem
Revision 1.8 Intel order number E45274-011
63
6.5.1 SAS/SATA Backplane Layout
The hot-swap backplane installs on the back side of the hot-swap drive bay inside the system.
Alignment features on the system and backplane assembly make for easy tool-less installation.
For instructions on installing and removing the backplane, see the Intel
®
Server System
SR2600UR/SR2625UR Service Guide. The following diagram shows the layout of components
and connectors found on the board.
A. Slimline interposer Card Connector C. Control Panel Connector
B.
Slimline USB Floppy Connector
D.
SAS/SATA Hot-swap Connectors
Figure 37. Hot-swap SAS/SATA Backplane (Front Side View)