Technical Product Specification

Peripheral and Hard Drive Subsystem Intel® Server System SR2600UR TPS
54 Intel order number E45274-011 Revision 1.8
6. Peripheral and Hard Drive Subsystem
The system can be configured to support several different hard drive and peripheral
configurations. The peripheral/hard drive subsystem consists of a drive bay supporting a
slimline optical drive, hard drives, and a flex bay; a midplane; and a hot-swap backplane. This
chapter describes the details for each subsystem component.
A. Slimline SATA Optical Drive Bay
B.
Flex Bay - Sixth Hard Drive (shown), Tape Drive, or two
fixed 2.5-inch Hard Drives (Optional)
C. System Control Panel
D. 3.5-inch Hard Drive Bays (5)
Figure 27. Optional Sixth Hard Drive (Front View)
6.1 Slimline Drive Bay
The system provides a slimline drive bay that is designed to support a single slimline SATA
optical drive or USB Floppy Drive. For a list of supported drives, use the Server Configurator
Tool available at
http://serverconfigurator.intel.com/default.aspx.
Either drive type is mounted to a tool-less tray that allows for easy installation into and removal
from the system. Once inserted into the system, the assembly locks into place. It is not hot-
swappable. For removal, the system must be powered down, the system top cover removed
and the locking latch disengaged. For additional details, see the Intel
®
Server System
SR2600UR/SR2625UR Service Guide.