Technical Product Specification

Jumper Blocks Intel® Server Board S5520UR and S5520URT TPS
Intel order number E44031-012 Revision 1.9
118
The BIOS POST screen appears displaying progress and the system automatically
boots to the EFI shell.
The Startup.nsh file executes, updating the BIOS.
5. Once successfully updated, power down the system and remove AC power.
6. Replace the BIOS Recovery Jumper (J1D4) to its default location on pins 1-2.
7. Reapply AC power and power on the system.
*DO NOT* interrupt the BIOS POST
during the first boot.
8. After a successful boot, reboot the system and press F2 when prompted to enter the
BIOS setup and configure any settings.