Technical Product Specification

Intel® Server System SR1625UR TPS 2BPower Subsystem
Revision 2.0 Intel order number E47487-012
17
3.1.1 DC Output Connection (Card Edge)
Figure 13. DC Output Connection (Card Edge)
3.2 Single Power Supply Module Population
In single power module configurations, the server management firmware requires that power
supply module #1 be populated. The power module #1 slot is located closest to the server
board away from the side edge of the system (see Figure 14). The non-operating slot must
have the power supply blank installed.
Figure 14. Power Supply Module #1 Location
SMB ALERT
Power supply #1
Chassis Side Edge
Air
Flow
Power supply #2
Ground
Ground
+12 V
+12 V
Bottom
Top
5VSdBy
5VSdBy
5VSdBy
5VSdBy
+12VRS+
A1
A0
SDA
SCL
PS_Kill
PS_ON
PW_OK
+12VRS- 12LS
Vsense-
PDB_Alert
Present
PDB_Fault