Technical Product Specification

2BPower Subsystem Intel® Server System SR1625UR TPS
16 Intel order number E47487-012 Revision 2.0
3. Power Subsystem
The power subsystem of the system consists of an integrated Power Distribution Module (PDM),
a Power Module Enclosure, and support for up to two 650-W power supply modules. The power
subsystem can be configured to support a single module in a 1+0 non-redundant configuration,
or dual modules in a 1+1 redundant power configuration. In a 1+1 configuration, a single failed
power module can be hot-swapped with the system running. Either configuration supports up to
a maximum of 650 Watts of power.
This chapter provides technical details on the operation of the power supply module and power
subsystem. For additional information, refer to the Intel
®
Server System SR1625 AC Power
Supply Specification and the Intel
®
Server System SR1625 Power Distribution
Module Specification.
3.1 Mechanical Overview
Notes:
1. All dimensions are in mm.
2. AC inlet can protrude beyond the front panel of the power supply module.
3. Fans are powered from +12 V when power supplies are ON.
4. Fans are powered from 5 VSB when in standby mode.
Figure 12. Power Supply Module Enclosure - Dimensional Drawing
320 mm
+/-0.5
39.0
+0.5/-0.5
54.5
+/- 0.5
Bi-Color LED
(PWR/Fail)
Airflow direction
4.0
AC
Fan
Fan
Beveled to allow smooth insertion into the system
Bevel
39 +/- 0.5 mm
40.25
+/- 0.5 mm