Technical Product Specification

Intel® Server System SR2625UR TPS Peripheral and Hard Drive Subsystem
Revision 1.8 Intel order number E46130-010
65
6.5.1 SAS/SATA Backplane Layout
The hot-swap backplane installs on the back side of the hot-swap drive bay inside the system.
Alignment features on the system and backplane assembly make for easy tool-less installation.
For instructions on installing and removing the backplane, see the Intel
®
Server System
SR2600UR/SR2625UR Service Guide. The following diagram shows the layout of components
and connectors found on the board.
A.
13-pin SATA Optical Drive Connector
B.
SATA Optical Drive Connector
Figure 36. Hot-swap SAS/SATA Backplane (Front Side View)