Technical Product Specification

Intel® Server System SR2625UR TPS Peripheral and Hard Drive Subsystem
Revision 1.8 Intel order number E46130-010
57
6. Peripheral and Hard Drive Subsystem
The system can be configured to support several different hard drive and peripheral
configurations. The peripheral/hard drive subsystem consists of a drive bay supporting a
slimline optical drive, hard drives, and a flex bay; a midplane; and a hot-swap backplane. This
chapter describes the details for each subsystem component.
A.
Flex Bay - Tape Drive, or two fixed 2.5-inch Hard Drives
(Optional)
B.
System Control Panel
C.
Slimline SATA Optical Drive Bay
D.
2.5-inch Hard Drive Bays (8)
Figure 28. Flex bay for 3.5-inch Tape Drive or Two 2.5-inch HDDs (Front View)
6.1 Slimline Drive Bay
The system provides a slimline drive bay that is designed to support a single slimline SATA
optical drive. For a list of supported drives, use the Server Configurator Tool available at
http://serverconfigurator.intel.com/default.aspx.
The optical drive is mounted to a tool-less assembly latch that allows for easy installation and
attachment to the system. Once it is inserted into the system, the assembly locks into place. It
is not hot-swappable. For removal, the system must be powered down, the system top cover
removed and the locking latch disengaged. For additional details, see the Intel
®
Server System
SR2600UR/SR2625UR Service Guide.