Service Guide

Intel
®
Server System SR1625UR Service Guide 75
c. Push firmly on the DIMM until it snaps into place and both levers close.
Figure 62. Installing the RAID Activation Key and the RAID Mini-DIMM
6. Install the power distribution board cover. For instructions, see “Replacing the
Power Distribution Module” on page 84.
7. Install the processor air duct. For instructions, see “Installing the Processor Air
Duct” on page 49.
8. Install the PCI riser assembly into the server system. For instructions, see
“Installing the PCI Riser Assembly” on page 44.
Removing the Intel
®
Integrated RAID Activation Key and the RAID
Mini-DIMM
To remove the Intel
®
Integrated RAID Activation Key and the RAID mini-DIMM, follow
these steps:
1. Remove the PCI riser assembly. For instructions, see “Removing the PCI Riser
Assembly” on page 43.
2. Remove the processor air duct. For instructions, see “Removing the Processor Air
Duct” on page 48.
3. Remove the Intel
®
Integrated RAID activation key by lifting straight up (see letter
“A” in Figure 63).
4. Remove the power distribution board cover. For instructions, see “Replacing the
Power Distribution Module” on page 84.
5. Remove the RAID mini-DIMM as follows:
a. Open both socket levers (see letter “B” in Figure 63)
Intel
®
RAID
Activation
Key Socket
RAID Mini DIMM
Socket
RAID Mini DIMM
RAID
Key
Open Levers
C
A
Midplane
Board
B
B
AF002861