Service Guide

74 Intel
®
Server System SR1625UR Service Guide
Installing and Removing the Intel
®
Integrated RAID
Activation Key and the RAID Mini DIMM (Active System
Only)
Installing the Intel
®
Integrated RAID Activation Key and the RAID
Mini-DIMM
To install the Intel
®
Integrated RAID Activation Key and the RAID mini-DIMM, follow
these steps:
1. Remove the PCI riser assembly. For instructions, see “Removing the PCI Riser
Assembly” on page 43.
2. Remove the processor air duct. For instructions, see “Removing the Processor Air
Duct” on page 48.
3. Install the Intel
®
Integrated RAID activation key by pushing straight down into the
RAID key socket (see letter “A” in Figure 62).
Make sure the socket metal clips snap securely over top edge of key.
4. Remove the power distribution board cover. For instructions, see “Replacing the
Power Distribution Module” on page 84.
5. Install the RAID mini-DIMM as follows:
a. Open both socket levers (see letter “B” in Figure 62)
b. Insert the DIMM into the socket (see letter “C” in Figure 62) making sure the
connector edge of the DIMM aligns correctly with the slot.