Service Guide

68 Intel
®
Server System SR1625UR Service Guide
Note: Cable connectors are keyed and can only go in one way.
Figure 55. Connecting the Intel
®
RMM3 cable
6. Connect the opposite end of the cable to the RMM3 connector on the server board
(see letter “A” in Figure 56).
7. Attach the module bracket to the chassis with two screws (see letter “B” in
Figure 56).
Note: The screws install from the back of the chassis.
Figure 56. Installing the Intel
®
RMM3 to the Server System
8. Install the processor air duct. For instructions, see “Installing the Processor Air
Duct” on page 49.
9. Install the PCI riser assembly into the server system. For instructions, see
“Installing the PCI Riser Assembly” on page 44.
Bottom
AF002949
B
RMM3
Connector
A
RMM3 Module
AF002857