Service Guide

Intel
®
Server System SR1625UR Service Guide 63
Figure 49. Installing an Optical Drive into the Server System
Removing a Slimline Optical Drive
To remove the slimline optical drive, follow these steps:
1. Press in on the plastic guide at the rear of the optical drive (see letter “A” in
Figure 50) and push forward to unlock and remove the slimline optical drive from
the server system.
Figure 50. Removing the Slimline Optical Drive from the Server System
2. Slide the optical drive out (see letter “B” in Figure 50)
3. If no device will be installed in this location, install a filler blank in this location.
TP02234
TP02261
A
B