Service Guide

46 Intel
®
Server System SR1625UR Service Guide
Installing the Replacement PCI Express* Riser Card
To install the replacement PCI Express* riser card, follow these steps:
1. Disconnect any cables attached to any add-in cards.
2. Remove the PCI riser assembly. For instructions, see “Removing the PCI Riser
Assembly” on page 43.
3. Remove any add-in cards from the PCI riser connector. For instructions, see
“Removing a PCI Add-in Card” on page 47.
4. Position the riser card in the assembly such the holes on the card and the assembly
align.
5. Secure the riser card using two screws (see Figure 30).
Figure 30. Installing the Replacement PCI Express* Riser Card
6. Install the PCI add-in card(s) if desired. For instructions, see “Installing a PCI Add-
in Card” on page 46.
7. Install the PCI riser assembly into the server system. For instructions, see
“Installing the PCI Riser Assembly” on page 44.
8. Connect any cables to add-in cards that require them. See your add-in card
documentation for information and add-in card requirements.
Installing and Removing a PCI Add-in Card
The following sections describe how to install and remove a PCI add-in card.
Installing a PCI Add-in Card
To install a PCI add-in card, follow these steps:
1. Remove the PCI riser assembly. For instructions, see “Removing the PCI Riser
Assembly” on page 43.
AF003041