Service Guide

44 Intel

Server System SR1625UR Service Guide

a. If you removed the PCI riser assembly for another procedure, continue with that

procedure.

Installing the PCI Riser Assembly

To install the PCI riser assembly, follow these steps:

1. Lower the riser assembly into place (see letter “A” in Figure 28).

2. Align the two hooks in the riser assembly with the matching slots at the back of the

server system (see letter “B” in Figure 28).

Figure 28. Installing PCI Riser Assembly into the Server System

3. Press down uniformly until the two hooks on the rear of the PCI riser assembly

engage the server system back panel slots. The riser cards will seat into the

matching sockets on the server board.

Riser Card

Edge Connector

PCI Riser

Socket

Chassis

Slots (2)

Hooks (2)

Air Duct

Slot

Processor

Air Duct

AF002852