Service Guide

42 Intel
®
Server System SR1625UR Service Guide
Figure 25. Removing the Server System Cover
Installing the Server System Cover
To install the server system cover, follow these steps:
1. Place the cover over the server system so that the side edges of the cover sit just
inside the server system sidewalls.
2. Slide the cover forward until it clicks into place (see letter “A” in Figure 26).
3. (Optional) Insert the security screw at the center of the top cover (see letter “B” in
Figure 26).
Figure 26. Installing the Server System Cover
TP02218
D
A
C
B
TP02219
A
B