Service Guide

18 Intel
®
Server System SR1625UR Service Guide
Front of Server System
Peripheral Devices
The server system provides locations and hardware for installing hard drives, CD-ROM
drive, or DVD-ROM drive. The drives must be purchased separately. The following figure
shows the available options.
.
Figure 9. Front Panel Features and Peripherals
Hard Disk Drives
The server system supports 2.5 inch SAS or Serial ATA (SATA) hot-swap drives. The
system can support:
• Up to eight 2.5 inch hard drives with the mini control panel.
• Up to six 2.5 inch hard drives with the standard control panel or the Intel
®
Local
Control Panel.
For instructions on installing hard drives, see “Installing and Removing a Hot-swap Hard
Drive” on page 59.
Note: Drives can consume up to 17 watts of power each. Drives must be specified to run at a
maximum ambient temperature of 45
°C.
Note: The Intel
®
Server System SR1625UR does not support all SAS or Serial ATA (SATA) hard
drives. For a list of supported hard drives, use the Server Configurator Tool. For a web
link to this tool, see “Additional Information and Software” on page 3.
A A
B
C
D
TP02217
A. Rack Handles
B. Slimline Optical Drive
C. Mini Control Panel
D. Hard Disk Drive Bays (Optional HDD
Carriers shown)