Service Guide

Intel
®
Server System SR1625UR Service Guide 7
Peripheral Interfaces External connections:
• DB-15 video connector (back)
• RJ-45 serial Port A connector
• Two RJ-45 10/100/1000 Mb network connections
• Four USB 2.0 connectors (back)
• One USB 2.0 connector (front)
Internal connections:
• One USB 2x5 pin header, which supports two USB 2.0 ports
• One low-profile USB 2x5 pin header to support low-profile USB
Solid State drives
• One DH-10 Serial Port B header
• Six Serial ATA (SATA) II connectors
• Two I/O module connectors
• One RMM3 connector to support an optional Intel
®
Remote
Management Module 3
• SATA Software 5 Activation Key connector
• One SSI-EEB compliant front panel header
• One SSI-EEB compliant 24-pin main power connector
• One SSI-compliant 8-pin CPU power connector
• One SSI-compliant auxiliary power connector
Video On-board ServerEngines* LLC Pilot II Controller
• Integrated 2D Video Controller
• 32 MB DDR2 Memory
LAN Two 10/100/1000 Intel
®
82575 PHYs
Expansion Capabilities One x16 PCI Express* Gen 2 PCI riser slot capable of supporting a
full-length full-height PCI Express* add-in card
Hard Drives
• Up to eight 2.5 inch hot-swap SATA/SAS drives with mini
control panel
• Up to six 2.5 inch hot-swap SATA/SAS drives with standard
control panel or Intel
®
Local Control Panel
• Intel
®
Embedded Server RAID Technology II with SW RAID
levels 0/1/10
• Optional support for Software RAID 5 with activation key
Peripherals
• Slimline bay for slimline SATA optical drive
• One PCI Express* X16 add-in card slot (Gen 2)
Control Panel
• Standard control panel
• Intel
®
Local Control Panel
• Mini control panel
Table 2. Intel
®
Server System SR1625UR Feature Summary
Feature Description