Service Guide

Intel

Server System SR1625UR Service Guide 91

4. With the fan oriented correctly, insert the fan into the fan module (see letter “A” in

Figure 80).

5. Connect the fan cable to the matching connector on the midplane board (see letter

“B” in Figure 80).

Figure 80. Installing a System Fan

Removing and Installing the Fan Assembly

Removing the System Fan Assembly

To remove the system fan assembly, follow these steps:

1. If installed, remove the PCI riser assembly. For instructions, see “Removing the

PCI Riser Assembly” on page 43.

2. If installed, remove the processor air duct. For instructions, see “Removing the

Processor Air Duct” on page 48.

3. Remove the bridge board. For instructions, see step 4 in “Removing the Midplane

Board” on page 70.

AF002871