Service Guide

Intel
®
Server System SR1625UR Service Guide 87
1. Press the latch at the back of the mini control panel and push the control panel
forward to release it from the system (see letter “A” in Figure 74).
2. Slide the mini control panel out through the front of the server system (see letter
“B” in Figure 74).
3. Remove the filler panel or two right drive carriers (see letter “C” in Figure 74).
Figure 74. Removing Mini Control Panel Module from the Server System
4. Connect the USB and data cables to the replacement control panel (see letter “A” in
Figure 75)
5. Feed the cables of the replacement control panel through the chassis opening (see
letter “B” in Figure 75).
Figure 75. Connecting the Control Panel Cables
6. Slide the replacement control panel into the server system (see letter “A” in
Figure 76) until it clicks into place.
7. Connect the two cables to the USB and control panel connectors on the backplane
as shown (see letter “B” in Figure 76).
Latch
Mini Control
Panel
A
C
B
Filler Panel
AF002868
Local
Control Panel
A
B
AF002951
USB
Cable
Data
Cable