Service Guide

Intel
®
Server System SR1600UR Service Guide 79
c. Close the retention clips on both ends (see letter “C” in Figure 70).
Figure 70. Installing the Bridge Board
8. Connect the fan cables to the corresponding connectors on the backplane (see letter
“A” in Figure 71).
9. Connect the USB and data cables from the control panel to the USB connector and
front panel connector on the backplane (see letter “B” in Figure 71).
10. Connect the power cable to the power connector on the backplane (see letter “C” in
Figure 71).
11. Passive backplane only: Do the following:
Server
Board
A
AF002897
A
B