Service Guide

70 Intel

Server System SR1600UR Service Guide

5. Install the I/O expansion module filler panel(s) into the system back panel (see

letter “C” in Figure 60).

Figure 60. Removing the I/O Expansion Module from the Server System

6. Install the processor air duct. For instructions, see “Installing the Processor Air

Duct” on page 47.

7. Install the PCI riser assembly into the server system. For instructions, see

“Installing the PCI Riser Assembly” on page 42.

Installing and Removing the Intel

Remote

Management Module 3

Installing the Intel

RMM3

To install Intel

Remote Management Module 3, follow these steps:

1. Remove the PCI riser assembly. For instructions, see “Removing the PCI Riser

Assembly” on page 41.

2. Remove the processor air duct. For instructions, see “Removing the Processor Air

Duct” on page 46.

1-Socket

I/O Exp. Module

Standoff

Hole

2-Socket

I/O Exp. Module

Server Board

Connector

Filler Panels

Snap

Standoff

AF002856