Service Guide

Intel

Server System SR1600UR Service Guide 67

Figure 58. Removing the Slimline Optical Drive from the Tray

Filling Empty Server System Bays

You must install either a filler panel, drive blank, or empty drive carrier into an empty

drive bay. To access the drive bays, remove the front bezel if it is installed. For

instructions, see “Removing the Front Bezel” on page 38.

With the bezel removed, install the appropriate panel(s), blank, or empty hard drive bay(s)

as follows:

• If you do not have an optical drive or floppy drive installed in the slimline bay,

install the slimline filler panel.

• If you do not have a hard drive installed, install the drive blank into the hard drive

carrier.

• Install empty hard drive carriers into any remaining empty hard drive bays.

Metal Tab

AF002893