Service Guide

66 Intel
®
Server System SR1600UR Service Guide
10. (Optional) For installing the optional USB floppy drive, note the location of the
USB connector on the backplane and refer to the documentation that came with the
device.
Removing a Slimline Optical Drive or Internal USB Floppy
To remove the slimline optical drive or USB floppy, follow these steps:
1. If removing an internal USB floppy drive, unplug it from the backplane.
2. Disconnect the power and data cables from the rear of the optical device.
3. Press the blue release lever (from inside the chassis) to unlock the optical drive tray
and remove the slimline optical drive tray assembly from the server system (see
Figure 57).
Figure 57. Removing the Slimline Optical Drive Assembly from the Server System
4. Press downward on the side of the tray (see letter “A” in Figure 58) and disengage
the drive from the two metal tabs on the opposite side of the tray (see letter “B” in
Figure 58).
5. Slide the optical drive out (see letter “C” in Figure 58) to remove it from the tray.
Optical
Device Tray
Assembly
Blue Release
Lever
A
B
AF002892