Service Guide

Intel

Server System SR1600UR Service Guide 59

Figure 47. Installing Fixed Hard Drive into the Carrier

8. Slide the hard drive carrier into the server system until it clicks into place.

Note: All hard drive carriers must be installed in the server system and populated with either a

drive or a drive blank to maintain system thermals.

9. Connect one end of the SATA data cable(s) to the SATA connector(s) on the server

board (see letter “A” in Figure 48).

10. Connect the opposite end of the SATA data cable(s) to the hard drive(s) (see letter

“B” in Figure 48).

11. Connect the SATA power connector(s) to each installed hard drive (see letter “C” in

Figure 48).

AF002381

SATA 0

SATA 1

SATA 2

Backplane

Fixed

Drive 1

Power

Supply

Cable

Connector

Data

Power

Back View of

SATA Drive

Fixed

Drive 2

Optical

Device

Fixed

Drive 0

AF003018