Service Guide

44 Intel
®
Server System SR1600UR Service Guide
Installing the Replacement PCI Express* Riser Card
To install the replacement PCI Express* riser card, follow these steps:
1. Disconnect any cables attached to any add-in cards.
2. Remove the PCI riser assembly. For instructions, see “Removing the PCI Riser
Assembly” on page 41.
3. Remove any add-in cards from the PCI riser connector. For instructions, see
“Removing a PCI Add-in Card” on page 45.
4. Position the riser card in the assembly such the holes on the card and the
assembly align.
5. Secure the riser card using two screws (see Figure 29).
Figure 29. Installing the Replacement PCI Express* Riser Card
6. Install the PCI add-in card(s) if desired. For instructions, see “Installing a PCI Add-
in Card” on page 44.
7. Install the PCI riser assembly into the server system. For instructions, see
“Installing the PCI Riser Assembly” on page 42.
8. Connect any cables to add-in cards that require them. See your add-in card
documentation for information and add-in card requirements.
Installing and Removing a PCI Add-in Card
The instructions below describe how to install and remove a PCI add-in card.
Installing a PCI Add-in Card
To install a PCI add-in card, follow these steps:
1. Remove the PCI riser assembly. For instructions, see “Removing the PCI Riser
Assembly” on page 41.
AF003041