Service Guide

42 Intel

Server System SR1600UR Service Guide

— If you removed the PCI riser assembly for another procedure, continue with that

procedure.

Installing the PCI Riser Assembly

To install the PCI riser assembly, follow these steps:

1. Lower the riser assembly into place (see letter “A” in Figure 27).

2. Align the two hooks in the riser assembly with the matching slots at the back of the

server system (see letter “B” in Figure 27).

Figure 27. Installing PCI Riser Assembly into the Server System

3. Press down uniformly until the two hooks on the rear of the PCI riser assembly

engage the server system back panel slots. The riser card seats into the matching

sockets on the server board.

4. Connect any cables to add-in cards that require them. See your add-in card

documentation for information and add-in card requirements.

PCI Riser

Socket

Chassis

Slots (2)

Hooks (2)

Riser Card

Edge Connector

Air Duct

Slot

Processor

Air Duct

AF002895