Service Guide

20 Intel
®
Server System SR1600UR Service Guide
Figure 10. Standard Control Panel
Intel
®
Local Control Panel
The following diagram identifies the features available on the Intel
®
Local Control Panel.
Note: The Intel
®
Local Control Panel is only supported in the hot-swap hard drive system
(Product Code: SR1600URHS).
For instructions on installing the standard control panel, see “Replacing the Control Panel
Module (Hot-swap Hard Drive System only)” on page 88.
F. System Status LED Solid green indicates normal operation.
Blinking green indicates degraded performance.
Solid amber indicates a critical or non-recoverable condition.
Blinking amber indicates a non-critical condition.
No light indicates POST is running or the system is off.
G. System Identification
LED
Solid blue indicates system identification is active.
No light indicates system identification is not activated.
H. System Identification
Button
Turns on/off the system identification LED.
I. Reset Button Reboots and initializes the system.
J. USB Port Allows you to attach a USB component to the front of the system.
K. NMI Button Puts the server in a halt-state for diagnostic purposes and allows
you to issue a non-maskable interrupt. After issuing the interrupt,
a memory download can be performed to determine the cause of
the problem.
L. Video Port Allows you to attach a video monitor to the front of the system.
The front and rear video ports cannot be used at the same time.
NOTE: The video port option is only available on the hot-swap
hard drive system (Product Code: SR1600URHS).
Callout Feature Function
TP02099
O M L K J HIN G
C
D
E
F
BA