Technical Product Specification

Standard Control Panel Intel® Server System SR1600UR TPS
50 Intel order number E45725-010 Revision 1.8
 By issuing the appropriate hex IPMI “Chassis Identify” value, the ID LED either blinks
blue for 15 seconds and turns off or blinks indefinitely until the appropriate hex IPMI
chassis identify value is issued to turn it off.
7.3 Control Panel Connectors
The control panel has two external I/O connectors:
 One USB port
 One VGA video port
The following tables provide the pin-outs for each connector.
Table 39. External USB Connectors (J1B1)
Pin #
Description
1
PWR_FP_USB2
2
USB_DN2_FP_R
3
USB_DP2_FP_R
4
GND
5
GND
6
GND
7
GND
Table 40. Video Connector (J1A1)
Description
Pin #
Pin #
Description
VGA_RED
1
9
GND
VGA_GREEN
2
10
GND
VGA_BLUE
3
11
Unused
Unused
4
12
VGA_DDCDAT
GND
5
13
VGA_HSYNC_L
GND
6
14
VGA_VSYNC_L
VGA_INUSE_L
7
15
VGA_DDCCLK
GND
8
16
GND
17
GND
If a monitor is connected to the front panel video connector, the rear video port on the server
board is disabled and the front panel video is enabled.
The video source is the same for both
connectors and is switched between the two, with the rear video having priority over the control
panel.
This provides for easy front accessibility to the server.