Technical Product Specification

Hard Disk Drive Support Intel® Server System SR1600UR TPS
42 Intel order number E45725-010 Revision 1.8
Pin #
Description
Pin #
Description
37
IPMB_I2C_5VSB_SCL
38
GND
39
IPMB_I2C_5VSB_SDA
40
HDD_LED_5V_A
41
FP_PWER_LED_R_N
42
FAULT_LED_5VSB_P
43
FP_PWR_LED_5VSB
44
LED_STATUS_AMBER_R1
45
RST_P6_PWRGOOD
46
LED_STATUS_GREEN_BUF_R1
47
HDD_LED_ACT_R_L
48
P5V
49
P5V_STBY
50
P5V_STBY
6.3.3.4 Control Panel USB Interface Connector (Backplane to Control Panel)
The backplanes provide a pathway for control panel USB signals from the bridge board
connector to the control panel USB interface connector. The following table provides the pin-out
for the 10-pin control panel USB connector.
Table 28. 1x10 Pin Control Panel USB Connector Pin-out (J6B1)
Pin#
Description
1
P5V_USB_P1
2
USB_P1N
3
USB_P1P
4
GROUND
5
GROUND
6
P5V_USB_P2
7
USB_P2N
8
USB_P2P
9
GROUND
10
GROUND
6.3.3.5 Hot-swap SATA/SAS Drive Connectors
The backplanes provide three hot-swap SATA/SAS connectors, which provide power and
signals using a single docking connector. Each drive attaches to the backplane using one of
these connectors.
Table 29. SAS/SATA Hard Drive Connector Pin-out (J8N1, J6N1, J3N1)
Pin#
Signal Description
SI
Ground
S2
SAS#_TX_DP (# = 0…2)
S3
SAS#_TX_DN (# = 0…2)
S4
Ground
S5
SAS#_RX_DN (# = 0…2)
S6
SAS#_RX_DP (# = 0…2)
S7
Ground
S8
Not Used
S9
Not Used
S10
Not Used
S11
Not Used
S12
Not Used
S13
Not Used
S14
Not Used
P1
Not Used
P2
Not Used
P3
Not Used