Service Guide

Intel

Server System SR2600UR/SR2625UR Service Guide 51

Installing the PCI Riser Assembly

To install the PCI Riser Assembly, follow these steps:

1. Lower the riser assembly into place (see letter “A” in Figure 33).

2. Align the three hooks in the riser assembly with the matching slots at the back of

the server system (see letter “B” in Figure 33).

Figure 33. Installing PCI Riser Assembly into the Server System

3. Press down uniformly until the three hooks on the rear of the PCI riser assembly

engage the server system back panel slots. The riser cards will seat into the

matching sockets on the server board.

4. Connect any cables to add-in cards that require them. See your add-in card

documentation for information and add-in card requirements.

Hooks (3)

Server

Board

Riser

Socket

AF002968

Chassis Back Panel

Hook (3)

Riser

Socket

PCI

Riser

Assembly

Slot (3)